For single, double and triple line crossing Comfortable 8" wide steps with safety treads Hand rails at 42" high Filler Strips for foot stability Gap plates for multiple lines

Low profile conveyor rails - wheel or roller - application driven Escapement stops Pallet Jack/Fork Truck entry guides Impact load zones Pallet transfer carts

100 lb. ball capacity Bolt in strips from 12" to 26" O.A.W. Patterns as required based on conveying surface of container

Totally adjustable on "X" and "Y" axis. Both photo cell and reflector. Heights as required Mounts to all major brand conveyors

Structural Channel, adjustable height with pivoting stand heads Diagonal bracing Minimum 6" x 6" x 1/4" thick floor plates Heights from 72" - 216" Widths from 18" - 48" Seismic Design on request, with customer approval of design - additional charge for Seismic Certification

Inside radius of 12" Outside radius up to 36" O.A.W. Split rollers or straight 1.375" diameter or 1.9" diameter rollers 2-1/2" or 3-1/2" deep frames

1/3 HP shaft mounted motor 4" wide belt with "V" back guide "V" grooved pullies at drive and take up Manual or air operated pivot Mounts to all major brand conveyors

4" Dogbone UHMW face Lengths as required with pin positioning locks Optional face designs by request Mounts to all major brand conveyors